Doing nothing? It’s not an option!

Concrete is the most widely used construction material in the world, with over 6 billion tonnes produced globally each year!

Which is more important – short-term construction cost or long-term durability? That’s a very common dilemma in the construction industry, and concrete is a classic example. ‘Cutting corners’ may achieve the immediate requirements of the contractor and the client, but compromise the service life of some part of the finished building.

One example of this is concrete floors which will be under vehicular traffic. It is surprisingly common to leave this concrete unsealed, to save money or time. Even where a sealer has been called for by the designer, it may be culled towards the end of the project when the contractor is looking for ways of saving costs.

This may appear reasonable if the sealer is seen as only a decorative finish. Generally, these are only surface treatments and often wear off with traffic.

In fact, concrete floor sealer plays an important part in helping preserve the long-term service life of the floor, by alleviating wear and dusting caused by traffic.

 

Exposed concrete surfaces have a tough time.

The obvious challenges to concrete durability would be wear and contamination. A bare concrete floor will degrade over time through the impact of vehicle and foot traffic, and contaminant spills. Areas not subject to direct wear may still be exposed to weathering or environmental contamination, depending on the circumstances.

A less obvious challenge is moisture-borne contamination. Contaminants in the air, such as car exhaust fumes, can be carried into concrete by moisture vapour. Reactive chemicals can find their way into the concrete, triggering a cycle of the breakdown of the concrete and corrosion of the rebar.

 

Concrete needs protection

That’s the bottom line.

Doing nothing is not an option2 1 300x168 1

Cost-effective solutions?

Let’s talk about hydrogel treatments. Spray-applied AQURON 1000, for example, can replace…

  • Curing compound (or the water curing process and its associated labour costs)
  • Dust-proofer
  • Surface Hardener
  • Concrete sealer

Yes, one treatment can replace up to four products! This makes it an extremely cost-effective solution!

We’d like to talk to you about cost-effective concrete protection options for your project. Get in touch today!

Like to learn about INFRA-TECT concrete protection system? You can

the free overview brochure!

Let us keep you Updated.

Subscribe to our ON.CRETE. updates to receive our latest content, plus news and views from the world of concrete.

Scroll to Top